BERKEM GALVALINK 302B, Руководство пользователя

Страница: 8 / 36

01/12/14 Manuale Uso GALVALINK_302B_v3_14 EN Completo 8
GALVALINK 302B is composed of:
A. A main casing that contains all the machine parts (
Fig.1
). The machine casing is equipped
with a cover ( Fig.3-1 ) to protect the glass Pyrex Tanks, where the plating phases are
operated, and a temperature probe.
B. Two glass Pyrex Tanks, with a 2 litre capacity ( Fig.2-1 )
C. An anode electrode for degreasing, in stainless steel ( Fig.2-2 )
D. An anode electrode in platinised titanium ( Fig.2-3 )
E. A black cathode cable with crocodile clip ( Fig.2-5 and 2-6 )
F. A mains power cable
A1) Machine casing
The machine casing is made of painted metal and contains all the parts of the machine: the walls are
closed and you need tools to enter. The access area of the two Tanks is closed using a sturdy cover,
hinged to the casing. The machine must be placed on a flat, horizontal surface and is stabilised by four 1
cm feet. The machine casing has no sharp parts or protruding corners dangerous for the operator.
The compartments for the glass Pyrex Tanks are sub-divided into (
Fig. 6 ):
• TANK 1 (left): generally used for degreasing, it does not have a thermostat and comes with an
anode output for the electrode in stainless steel ( Fig.2-2 )
• TANK 2 (right): Tank for plating use, with a digital thermostat, a magnetic stirrer in the solution
and an electrode in platinised titanium ( Fig.2-3 )
• The machine is equipped with a current and voltage rectifier, variable from 0 to 12 Volts, 0 – 10
Ampere
The left side of the machine casing has a connection socket to the power supply on the machine - with
an incorporated fuse box for a 5A 220 Vca fuse ( Fig.3-2 ) - and the POWER start-up Key ( Fig.3 ).
Behind the Tanks ( Fig.4 ) there are the contacts to which the cathode cables are connected:
• RED positive anode contacts ( Fig.4-1 ): clamps to connect the anodes
• BLACK negative cathode contact ( Fig.4-2 ): clamp to connect the objects to treat.
ATTENTION: The machines, by operating, develop vapours due to electrolytic
plating, therefore they should be placed in a working place equipped
with an adequate suction hood.
A2) Command and adjustment panel
The command and adjustment panel is on the front of the machine casing (Fig.1 and 5 ) .
Description of the command and adjustment functions :
REFERENCE DESCRIPTION FUNCTION
KEY 1
KEY 2 

Menu navigation cursors. They are
used to move in the menus and to
change the parameters and settings
KEY 3 START/ STOP/ BACK Activates the selected program
(START), stops a program in progress
(STOP) or allows you to go back