BERGHOF B-PRIMIS ET-PRO Series Скачать руководство пользователя страница 18

Страница: 18 / 61

USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES

Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com

S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx

Assembly

4.1. Preparation for installation

The devices are intended for installation in a rectangular cut-out on a front panel. The support material
must be rigid.

Prerequisites:

→

The device must have a clear space of at least 20 mm all round at the rear, to allow sufficient air
circulation.

→

The max. surrounding air temperature in the control cabinet must not exceed 55°C during opera-
tion.

→

The support material for the installation cut-out must be of the specified thickness (see installa-
tion cut-out) and must be flat and sufficiently stable.

NOTICE

Damage to the device!

Installation on uneven support material can lead to mechanical stresses and cracks in the front face or to
malfunctioning of the touch screen.



Make sure that the mounting points of the device are all in a common plane, with no more than maxi-
mum ±0.5 mm variation.

4.1.1. ET-Pro 4 dimensions

Fig. 4: ET-Pro 4 dimensions

Содержание B-PRIMIS ET-PRO Series






























































Результаты поиска

Содержание B-PRIMIS ET-PRO Series

Отзывы:

Похожие инструкции для B-PRIMIS ET-PRO Series

Бренды по названию

Популярные бренды

BERGHOF B-PRIMIS ET-PRO Series, Руководство пользователя

Результаты поиска

Содержание B-PRIMIS ET-PRO Series

Отзывы:

Похожие инструкции для B-PRIMIS ET-PRO Series

Бренды по названию

Популярные бренды