BERGHOF B-PRIMIS ET-PRO Series, Руководство пользователя

Страница: 41 / 61

USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx
41
9th
Skip the following pages via the “Next” button until the page with the summary of the network set-
tings appears
Fig. 31: Network settings summary
10th
If no settings have been changed, press the “OK” button.
The device’s main page appears.
– or –
Press the “Save” button.
The settings are saved and the device reboots automatically.
11th
Connect the device to the controller using a network cable.
The device is configured and ready for use.
6.2.2. Web terminal configuration
The device must be connected to the network with the correct settings before it can be used in Web
Terminal mode. To do so, please read section 6.2.1 VNC client configuration, steps 3 and 4.
12th
Supply power to the device (24 V).
After startup, the current network settings are shown (Server IP, IP address and net mask).
13th
Press the “Configuration” button and then the “Next” button.
The device’s Network Settings page appears.
14th
Press the “Expert” button and press the “Change” button to change the device to Web Terminal
mode.
Fig. 32: Changing to Web Terminal mode
15th
Skip the following pages via the “Next” button until the page with the summary of the settings
performed appears.
16th
Press the “Save” button. The settings are saved and the device reboots automatically.
After reboot, the device is in Web Terminal mode.