BERGHOF B-PRIMIS ET-PRO Series Скачать руководство пользователя страница 8

Страница: 8 / 61

USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES

Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com

S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx

Structure of the warnings:

WARNING

Optional:

More
symbols

Type and source of the danger

Brief description and consequences



Preventive measures

1.3. Hazard categories and indications

The following indications are used for warning messages that must be observed to ensure your per-
sonal safety and avoid any damage to property.

The indications have the following meanings:

DANGER

Serious injury or death

Failure to observe the safety measures will result in death or serious injury.



Take preventive measures.

WARNING

Possible serious injury or death

Failure to observe the safety measures may result in death or serious injury.



Take preventive measures.

CAUTION

Possible minor injuries

Failure to observe the safety measures may result in minor injuries.



Take preventive measures.

NOTICE

Possible damage to property

Failure to observe the safety measures may result in damage to property.



Take preventive measures.

Содержание B-PRIMIS ET-PRO Series






























































Результаты поиска

Содержание B-PRIMIS ET-PRO Series

Отзывы:

Похожие инструкции для B-PRIMIS ET-PRO Series

Бренды по названию

Популярные бренды

BERGHOF B-PRIMIS ET-PRO Series, Руководство пользователя

Результаты поиска

Содержание B-PRIMIS ET-PRO Series

Отзывы:

Похожие инструкции для B-PRIMIS ET-PRO Series

Бренды по названию

Популярные бренды