BERGHOF B-PRIMIS ET-PRO Series, Руководство пользователя

Страница: 17 / 61

USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx
17
Order number Valid for Remarks
S-02020201-0100
ET-Pro 4
Connector:
2-pin plug-in connector for the
power supply
Weidmüller BLZF 3.50/02/180
ET-Pro 7
ET-Pro 10
ET-Pro 15
3.3. Product features
Assembly
The device is designed for installation in a front panel or in a control cabinet in a rough industrial envi-
ronment.
Processor
In its basic configuration, the device is equipped with an 800 MHz ARM
®
CPU with a Cortex™ A9 core.
Customer-specific variants are available, which instead of a single core processor are equipped with a
dual core or quad core processor.
Ethernet
The device has an Ethernet interface with 10/100 Mbit/s. This is used for standard Ethernet connec-
tions. The TCP/IP and UDP protocols permit flexible connections to visualisation software, upstream
control units and to the IT infrastructure.
USB
The USB host interface allows a wide range of peripherals to be connected to the device. This allows a
USB thumb drive to be used for updating the application or for downloading data directly.
USB thumb drives with FAT/FAT32 formatting are supported.
If you require support for other USB formats, please contact our Technical Support team.
Additional interfaces
There is also a debugging interface located on the device which is accessible via a 3.5-mm jack plug
with a special cable (contact Customer Services if necessary).
microSD card
The microSD card interface is designed for future applications.
Summary of features
→ ARM® CPU with CortexTM-A9 single core (800 MHz; optional dual core or quad core)
→ User program and data memory (RAM): 512 MB onboard
→ User program memory (flash) 512 MB onboard
→ 1 USB host interface (USB 2.0)
→ 1 Ethernet 10/100 Base T interface