BERGHOF B-PRIMIS ET-PRO Series, Руководство пользователя

Страница: 10 / 61

USER HANDBOOK 1.0 | B-PRIMIS ET-PRO SERIES
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | Germany | www.berghof-automation.com
S_B-Primis_ET-Pro_DE_1_0_EN_neu.docx
10
1.6. Intended use
The device is a component of a modular automation system for industrial control applications in the
medium to high performance range. It extends the communication options with EtherCAT, Profinet or
Modbus for example.
The automation system is designed for use in overvoltage category I (IEC 364-4-443) for the control
and regulation of machinery and industrial processes in low-voltage installations in accordance with the
following basic conditions:
→ Maximum rated supply voltage of 1,000 V AC (50/60 Hz) or 1,500 V DC
→ For use in an environment with max. category 2 level of pollution (EN 61010-1).
→ For use in a maximum altitude of 2,000 m a.s.l.
→ For indoor use in areas not exposed to direct UV radiation
→
Max. ambient temperature inside and outside the control cabinet according to the technical spec-
ifications (see “Technical data”).
Correct and safe operation of the automation system requires qualified project planning, proper
transport, storage, installation and use as well as careful maintenance.
The automation system may only be used within the scope of the information and applications speci-
fied in this documentation and associated user handbooks.
The automation system must only be used as follows:
→ As intended
→ In technically perfect condition
→ Without unauthorised modifications
→ By qualified users only
 Observe the rules of the employers' liability insurance association, the German Technical Inspec-
tion Association (TÜV), the Association of German Electrical Engineers (VDE) or relevant na-
tional regulations.
The device is intended for installation in a suitable installation cut-out in industrial machines and sys-
tems in indoor areas.
 During installation, make sure that the existing seal profiles are undamaged.
 For operation, refer to the applicable ambient conditions (see “Technical data”).