18
DISMOUNTING
On a level surface, park the tractor and apply the
parking brake.
a) Install the pin (item 1) in the locked position.
b) Lower the tiller to the ground.
c) Remove the V-belt from the engine pulley (item 9).
d) Disconnect the clutch cable if installed.
e) Lower the front support (item 4).
f)
Remove the link (item 8) from the tractor frame.
g) Raise the tiller’s lift arm (item 2) to support the tiller
frame.
h) Unscrew the pin (item 6) from the hitch.
i)
Pull out the tiller from the tractor hitch.
j) Using the lift arm, lower the tiller to the ground and
raise the front support.
k) Place the lift arm so the tiller rests flat on the
ground.
l)
Slide out the tiller from the tractor.
7
WARNING
7
TO PREVENT INJURIES:
Stop the motor.
Apply parking brake.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
END OF SEASON STORAGE:
a) Clean the rotary tiller.
b) Check the belts.
c) Replace damaged or worn parts.
d) Paint scratched surfaces to prevent rust.
e) Lubricate the grease points.
f) Store the tiller on a hard level surface in a clean,
dry place. If tiller must stay outside, wrap it in a
waterproof cover.
DISMOUNTING THE ROTARY TILLER