7
ASSEMBLY
*
These measurements are given as a reference only.
After installing the rotary tiller, the frame should be 4.5"
to 5.5" off the ground.
Note:
If the tiller’s frame touches the back of the tractor,
you may add one to four shims (item 3) between the
tiller’s back wall and the tiller hitch (item 2). If using more
than two shims, use the 3/8 x 2" hex bolts.
Verification:
Make sure the tiller’s frame will pass under
the transaxle when dismounting the tiller.
Install the lift arm (item 1) with four 5/16 x 3/4" bolts
(item 2) and flange nuts.
STEP 2
ROTARY TILLER PREPARATION
Determine the set of holes (item 1) to use to attach the
tiller’s hitch (item 2) by using the following chart:
7.63" to 8.25"
7
th
8.25" to 8.87"
6
th
8.87" to 9.5"
5
th
9.5" to 10.12"
4
th
10.12" to 10.75"
3
rd
10.75" to 11.37"
2
nd
11.37" to 12.00"
1
st
7.00" to 7.63"
8
th
*Measurement from the
ground to the tow hitch
Set of holes
from the top
Attach the tiller’s hitch
Install the lift arm