Berbel Firstline Unseen BEH 60 FLU, Инструкции по эксплуатации и установке для моделей

Страница: 16 / 36

16
Installation
6003295_g – 19.03.2019
☞
Fasten the mounting aid frames to the cabinet (chipboard
screws PZ2 4.5 x 16 mm).
☞
Screw the fastening brackets to the mounting aid frames
(metal screws PZ2 3.5 x 6.5 mm).
Only with cabinet depth 300 - 310 mm or with installation in
the installation frame (optional):
It is not possible to attach the angle trim strip to the rear side
of the hood body.
☞
Release the retaining clips of the angle trim strip from the
hood body.
With variants for the extracted air mode:
In order to ease installation, the following parts can be fitted
on the hood body before the hood body is installed.
E
A
B D
C
A 90-degree elbow
B Adapter ring
C Metal adapter
D Plastic fitting
E Retaining bracket (only with versions with recirculated air
filter permalyt BUR 125)
The attachment is described with the connection of the
exhaust air ducting.
D “3.5.8 Connect exhaust air ducting (with extracted air
mode)” (page 21).
In case of variants for the recirculated air mode and
installation in the installation frame (optional), the
recirculated air filter can be fitted now.
D “3.5.7 Install filter (with recirculated air mode)” (page 21).