Berbel Firstline Unseen BEH 60 FLU, Инструкции по эксплуатации и установке для моделей

Страница: 32 / 36

32
Dismounting
6003295_g – 19.03.2019
7. Dismounting
D
WARNING!
Danger of injuries through improper handling!
Taking the device down requires a great deal of physical
exertion due to its size and weight. If the device falls down,
serious injuries are possible.
☞
Two persons are required to take the device down.
☞
Ensure stable footing when taking the device down.
☞
Ensure that no other people are in the working area.
D ATTENTION!
Danger of property damage through improper handling!
Taking the device down requires a great deal of physical
exertion due to its size and weight. If the device falls, the
device, kitchen furnishings and other objects could be
damaged.
☞
Cover the cooled hob.
☞
Keep the installation area clear.
☞
Disconnect all poles of the power supply for the device.
☞
Pull out the mains plug.
☞
Remove any accessory connection cables.
In extracted air mode:
☞
Remove the exhaust air duct.
In recirculated air mode:
☞
Remove the filter.
☞
Remove the lower section and the Capillar Trap.
☞
Release the angle trim strip from the retaining clips on
the hood body.
☞
Remove the fixing screws from the bottom of the hood
body.
☞
Hold the hood body firmly from below.
☞
Release the hood body from the fastening brackets by
pressing down on the levers.
If the levers are not reachable:
☞
Turn the threaded bolts (not included in the scope of
supply) parallel into the holes of the fixing screws.
This results in the hood body being pressed downwards.
☞
Set the hood body down on a firm and protective surface.
☞
Unscrew the fastening brackets.
If present:
☞
Unscrew the mounting aid frames.
If present:
☞
Remove the installation frame.