Berbel Firstline Unseen BEH 60 FLU, Инструкции по эксплуатации и установке для моделей

Страница: 29 / 36

29
Cleaning
6003295_g – 19.03.2019
EN
Lower section
The lower section is held in the device by two pins at the
sides.
☞
Fold the lower section down.
1.
2.
☞
Press the lower section up.
☞
Pull on the lower section at the side with both hands and
draw it approx. 10 mm forwards.
☞
Lift the rear lower section out.
☞
Clean the lower section with a soft, moist cloth or in a
dishwasher.
☞
Dry the lower section with a soft cloth.
Upper section and bulging edge
The upper section is permanently attached to the device.
The bulging edge is attached and held in the device by
magnets.
☞
Pull the bulging edge from the upper section.
☞
Clean the upper section with a soft, moist cloth.
☞
Clean the bulging edge, such as in a dishwasher.
☞
Make sure the bulging edge is completely dry.
☞
Dry the upper section with a soft cloth.
Capillar Trap
The Capillar Trap is inserted and is held in the device through
a side lock.
☞
Grasp the Capillar Trap on its sides with both hands.
☞
Pull the Capillar Trap out in a bow movement.
☞
Clean the Capillar Trap e.g. in a dishwasher.
☞
Clean the surfaces and edges on the recess for the
Capillar Trap with a soft, moist cloth.
☞
Make sure that the Capillar Trap is completely dry.
After cleaning, the interior parts should be reinserted.
D
“3.5.9 Insert the Capillar Trap, bulging edge and lower
section” (page 23).