Berbel Firstline Unseen BEH 60 FLU Скачать руководство пользователя страница 12

Страница: 12 / 36

Installation

6003295_g – 19.03.2019

3.5

Installation procedure

Short overview:
1.  Preparation for installation
2.  Unpack the device
3.   Removing the lower section, bulging edge and

Capillar Trap

4.  Install the device
5.  Installation in the installation frame (optional)
6.  Connect accessories
7.  Install filter (with recirculated air mode)
8.  Connect exhaust air ducting (with extracted air mode)
9.  Insert the Capillar Trap, bulging edge and lower section
10. Establish electrical power supply
11. Check and carry out commissioning

3.5.1

Preparation for installation

The device is designed for installation in kitchen units.
The installation sequence may vary, depending on the local
conditions.

☞

Check that your device fits with the intended installation
situation.

“2.5 Installation variants and installation dimensions”
(page 8).

☞

Make sure that all required parts are present.

“2.4 Scope of delivery” (page 6).

☞

Familiarise yourself with the installation situation and the
associated documents.

Device and instructions.

Accessories.

Installation location.

Intended operating mode.

☞

Assemble the tools and materials required:

Stable stepladder

Folding rule or measuring tape

Pencil

Phillips head screwdriver, size 2

Protective material (e.g. thick cardboard) for the hob
and the worktops

☞

Keep the installation area free of objects that could be in
the way or that could be damaged.

☞

Make sure that the hob and other parts that could be
touched have cooled down.

☞

Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).

☞

Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.

If accessories (e.g. wall box, window contact switch) are
required for the installation:

Observe the instructions for the accessories.

☞

Ensure that the accessories are correctly installed and
ready for connection.

☞

Ensure that the connection cables from accessories are
correctly routed and accessible.

3.5.2

Unpack the device

ATTENTION!

Hazard of glass breaking or other damage due to

incorrect handling!

The device and its surfaces can be damaged when being
unpacked or transported.

☞

Do not cut into the protective cardboard packaging.

☞

Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).

☞

Unpack the device and all accompanying parts carefully.

☞

Place the device on its back on a firm, clean and
protective surface (e.g. thick cardboard).

☞

Check the device and its constituent parts for damage.

☞

Check the delivery is complete.

“2.4 Scope of delivery” (page 6).

If parts are missing or damaged:

☞

Please consult your dealer or customer services.

☞

Remove the packaging material.

“8.1 Dispose of packaging” (page 33).

Содержание Firstline Unseen BEH 60 FLU





































Результаты поиска

Содержание Firstline Unseen BEH 60 FLU

Отзывы:

Похожие инструкции для Firstline Unseen BEH 60 FLU

Бренды по названию

Популярные бренды

Berbel Firstline Unseen BEH 60 FLU, Инструкции по эксплуатации и установке для моделей

Результаты поиска

Содержание Firstline Unseen BEH 60 FLU

Отзывы:

Похожие инструкции для Firstline Unseen BEH 60 FLU

Бренды по названию

Популярные бренды