Berbel Firstline Unseen BEH 60 FLU, Инструкции по эксплуатации и установке для моделей

Страница: 21 / 36

21
Installation
6003295_g – 19.03.2019
EN
3.5.7 Install filter (with recirculated air mode)
Installation of the filter takes place adjacent to the fan
housing, on top of the hood body. The filter can be
positioned precisely.
☞
Align the recirculated air filter.
☞
Place the filter precisely on the hood body.
☞
Make sure that the filter is correctly positioned.
3.5.8 Connect exhaust air ducting (with extracted air
mode)
When connecting the exhaust air ducting it is possible to fit
the metal adapter and the 90-degree elbow to the device if
necessary.
Use and arrangement of the parts depend on the route of
the exhaust air ducting.
☞
If necessary, place the metal adapter in front of the fan
outlet.
☞
Turn the screws lightly into the fan box (metal screws
PZ2 3.5 x 6.5 mm).
☞
Place the metal adapter on the screws.
☞
Screw the metal adapter tight.
☞
Place the adapter ring on the plastic fitting.
☞
Screw the plastic fitting on the metal adapter or in front
of the fan outlet (metal screws PZ2 3.5 x 6.5 mm).