Berbel Downline Infinity BKA 90 DLI Скачать руководство пользователя

Страница: 12 / 44

Installation

6006047_0 – 02.09.2021

3.5

Installation procedure

Short overview:
1.  Preparation for installation
2.  Unpack the device
3.  Check the dimensions
4.  Install the hob
5.  Install recirculating air kit DL BUF
6.  Install recirculating air kit DL BUR
7.  Install exhaust air kit DL
8.  Connect accessories
9.  Establish electrical power supply
10. Check and carry out commissioning

3.5.1

Preparation for installation

The device is designed for installation in furniture structures.
The installation sequence may vary, depending on the local
conditions.

☞

Familiarise yourself with the installation situation and the
associated documents.

Device and instructions.

Intended operating mode and accessories.

Installation location.

Order documents.

Dimensions, position and alignment of the
components.

☞

Assemble the tools and materials required:

Set-down area (e.g. trestle)

Folding rule or measuring tape

Pencil

Spirit level

Saw

Phillips head screwdriver, size 2

Protective material (e.g. thick cardboard) for the hob
and the worktops

☞

Keep the installation area free of objects that could be in
the way or that could be damaged.

☞

Make sure that the hob and other parts that could be
touched have cooled down.

☞

Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).

☞

Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.

The instructions for installation variants with blow-out
grate kit must be observed.

If accessories (e.g. wall box, window contact switch) are
required for the installation:

Observe the instructions for the accessories.

☞

Ensure that the accessories are correctly installed and
ready for connection.

☞

Ensure that the connection cables from accessories are
correctly routed and accessible.

3.5.2

Unpack the device

ATTENTION!

Hazard of glass breaking or other damage due to

incorrect handling!

The device and its surfaces can be damaged when being
unpacked or transported.

☞

Do not cut into the protective cardboard packaging.

☞

Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).

☞

Unpack the device and all accompanying parts carefully.

☞

Remove the Powermover, the intake grate and the
separator insert from the device.

☞

Set the device down with the hob facing upwards on a
firm, clean and protective surface (e.g. thick cardboard).

☞

Check the device and its constituent parts for damage.

☞

Ensure that the accessories are appropriate for the
intended operating mode.

☞

Check the delivery is complete.

“2.4 Scope of delivery” (page 7).

If parts are missing or damaged:

☞

Please consult your dealer or customer services.

☞

Remove the packaging material and the protective film.

“8.1 Dispose of packaging” (page 41).

Содержание Downline Infinity BKA 90 DLI













































Результаты поиска

Содержание Downline Infinity BKA 90 DLI

Отзывы:

Похожие инструкции для Downline Infinity BKA 90 DLI

Бренды по названию

Популярные бренды

Berbel Downline Infinity BKA 90 DLI, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание Downline Infinity BKA 90 DLI

Отзывы:

Похожие инструкции для Downline Infinity BKA 90 DLI

Бренды по названию

Популярные бренды