Berbel Downline Infinity BKA 90 DLI, Инструкции по эксплуатации и монтажу

Страница: 17 / 44

17
Installation
6006047_0 – 02.09.2021
EN
x
☞
Cut the appropriate shallow duct sections. The quantity
and length must be adapted to the installation variant.
☞
Insert the shallow duct sections in the circulating air
bend.
☞
Re-adjust the recirculated air filter to the appropriate
height.
☞
Tighten the screw on the side of the recirculated air filter.
3.5.6 Install recirculating air kit DL BUR
Installation variant for recirculated air mode with recirculated
air filter permalyt.
The instructions for installation variants with blow-out
grate kit must be observed.
By trimming, it is possible to align the shallow duct with the
spacing between the connections:
y Between the fan‘s housing and circulating air bend with
deep base cabinets.
y Between the circulating air bend and recirculated air filter
with high base cabinets.
D “3.5.3 Check the dimensions” (page 13).
For the following steps, the adaptors of the air-carrying
components (e.g. circulating air bend, shallow duct sections)
must be sealed with sealing strip after they have been fit
together.
☞
Insert the circulating air bend in the connection on the
fan housing.
☞
Correctly align the recirculated air filter.
☞
Position the recirculated air filter.