Berbel BLB 60 FL, Инструкции по эксплуатации и монтажу

Страница: 9 / 64

Safety instructions for the installer
Safety 9
The device may only be installed over a fireplace for
solid fuels (e.g. a coal-burning stove) if:
§
the fireplace has a sealed cover which cannot be
removed. Otherwise there is an increased fire risk
due to flying sparks.
§
the legal and country-specific regulations are
observed.
Avoiding risks of injury
§
To prevent the risk of falling, use a stable
stepladder for all work on the device, for example
replacing the filter, installing and cleaning the
device.
§
To prevent the risk of injury by falling parts, do not
place any objects on the device.
§
To prevent injury from falling parts, only use
suitable fastening materials.
§
To prevent cuts from broken glass, use suitable
protective gloves.
Avoiding the risk of suffocation
If the device and an open fireplace which uses air from
the room for its oxygen supply, gases or waste gases
may be drawn into the room.
§
Make sure that all of the permits required for
operation in your country have been obtained (e.g.
the master chimney sweep).
§
Make sure that all standards and guidelines for
operating the device in your country are observed.
§
Ensure there is an adequate supply of fresh air into
the dwelling.
§
Never let children play with the foil or other parts of
the packaging.
§
Store the film or other parts of the packaging in a
location which is inaccessible to children.
Minimising the danger of collapse
In extracted air mode:
§
The wall breakthrough that is needed must be
created by technically qualified persons. Wall
breakthroughs affect the building's structural
stability. Improperly made wall breakthroughs could
result in the building collapsing.