Berbel BLB 60 FL Скачать руководство пользователя

Страница: 59 / 64

Disassembling the device

Installation instructions

Disassembling the device

DANGER

Lethal electric shock caused by
improperly performed electrical work.

Only allow work on the power supply
to be carried out by a qualified
electrician adhering to the country-
specific regulations and standards
(e.g. in Germany DIN 57100 / VDE
0100, part 701).

WARNING

Risk of falling when changing the filter
or during work carried out at height.

Use a stable step-ladder.

CAUTION

Risk of injury from falling parts.

Ensure that no-one is underneath
the device while working.

ATTENTION

Damage caused by falling parts.

Protect areas and devices (e.g.
cooled cooking hob) underneath the
working area against damage, e.g.
using a thick piece of cardboard.

To remove the device you need a second person.

For this work step, you need a small flat-head
screwdriver, a Phillips screwdriver and a 2.5 mm ball
Allen key.

To remove the device, proceed as follows:

Disconnect the power supply to the device on all
poles.

Remove the mains plug.

Remove the connection cables for the wall box and
the multi-function contact, if fitted.

Only BLB 60 FLE and BLB 90 FLE:

Remove the connection cable for the fan.

Only for hybrid and extracted air mode:

Remove the exhaust pipe.

Only for hybrid and recirculated air mode:

Remove the filter.

Open the lower section.

Remove both screws on the levers.

ATTENTION

Damage caused by falling parts.

Protect areas and devices (e.g.
cooled cooking hob) underneath the
working area against damage, e.g.
using a thick piece of cardboard.

Support the device with two people.

Push both levers backwards until they lock.

Lower the device with two people.

Loosen the screws on the brackets.

Remove the screws on the brackets.

Remove the brackets.

The device is disassembled.

Содержание BLB 60 FL

































































Результаты поиска

Содержание BLB 60 FL

Отзывы:

Похожие инструкции для BLB 60 FL

Бренды по названию

Популярные бренды

Berbel BLB 60 FL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание BLB 60 FL

Отзывы:

Похожие инструкции для BLB 60 FL

Бренды по названию

Популярные бренды