Berbel BLB 60 FL Скачать руководство пользователя

Страница: 22 / 64

Maintenance

Operating instructions

Maintenance

Maintaining the device

The device is maintenance-free.

Changing the bulbs

The device is fitted with LED lighting. The bulbs have a
service life of approximately 50,000 operating hours.

If you have any problems, contact your berbel
dealer or customer services.

Changing the filter filling (hybrid and

recirculated air filters)

Replace the filter filling in accordance with the following
table:

Usage

Time interval

Little or
occasional
use

At least every 24 months or when there
are odours in the exhaust air.

Daily or
heavy use

At least every 12 months or when there
are odours in the exhaust air.

WARNING

Risk of falling when changing the filter
or during work carried out at height.

Use a stable step-ladder.

WARNING

Risk of injury from hot parts.

Ensure that the cooking hob and the
device have cooled down.

Let all parts cool down before
beginning work.

WARNING

Risk of injury from falling parts.

Ensure that no-one is beneath the
working area when working on the
device.

ATTENTION

Damage caused by falling parts.

Protect areas and devices (e.g.
cooled cooking hob) underneath the
working area against damage, e.g.
using a thick piece of cardboard.

The filter must be easily accessible.

Remove all the screens and other attached
modifications. The filter must be easily accessible.

The filter is easily accessible.

Содержание BLB 60 FL

































































Результаты поиска

Содержание BLB 60 FL

Отзывы:

Похожие инструкции для BLB 60 FL

Бренды по названию

Популярные бренды

Berbel BLB 60 FL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание BLB 60 FL

Отзывы:

Похожие инструкции для BLB 60 FL

Бренды по названию

Популярные бренды