24
Bentone
6.2 Servicing air dampers
Removal and installation
1.
Break the main current and disconnect the Euro plugs from the burner.
2.
Undo the nuts (E) and pull out the burner body on its guides.
3.
Remove the intake grille from the air intake.
4.
Release the damper motor.
5.
Clean the air damper (F) and the intake. Lubricate the damper shaft if
applicable.
6.
Re-engage the damper motor.
7.
Fit the intake grille over the air intake.
8.
Slide the burner together and secure it with the nuts (E).
9.
Connect the Eurostecker connectors and turn on the main power
switch.
10. Check combustion*.
E
F
Note:
*
When servicing/replacing components that affect combustion, an
analysis and soot test must be carried out on the installation
!
If the burner is directly connected, ensure that all components on
the burner are without power.
Содержание B 55-2
Страница 35: ...35 Bentone 165 205 41 9 Oil burner control 9 1 Wiring diagram LMO24 255 B55 2H B65 2H...
Страница 36: ...36 Bentone 9 2 Wiring diagram LMO24 255 B55 2H R B65 2H R...
Страница 43: ...171 905 28...
Страница 44: ...Enertech AB P O Box 309 SE 341 26 Ljungby www bentone se www bentone com...