www.planikafires.com
i0776#01
30.04.2014
1
Configuration of the module with Wi-Fi and Smart Home System manual
This manual allows to configure the module in order to control the bio fireplace by means of:
1.
The device that has access to Wi-Fi (smartphone, tablet) – THE CONFIGURATION OF Wi-Fi
and SMARTPHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Smart Home System – SMART HOME SYSTEM CONNECTION . . . . . . . . . . . . . . . . . . . .
5
1.
THE CONFIGURATION OF WiFi and SMARTPHONE
The configured appliance will allow to:
-
Turn on the product (if READY message on display)
-
Turn off the product (for COOLING THE DEVICE or READY message on display)
-
Make the flame size lower or higher while the bio fireplace is working
-
Turn on/turn off ‘Lock the device’ function (Customer’s Menu, point 1)
-
Choose the bio fireplace which is to be controlled.
It will be also possible to check the serial number, program version, website version and total operating
time.
FLA 3 communicates with the exterior appliances by means of Wi-Fi.
Make sure that Wi-Fi network you have is of 802.11 b/g/n standard and it operates the encryption of
WPA/WPA2 PSK.
If your Wi-Fi network does not fulfill the above mentioned requirements it has to be adjusted.
Otherwise, remote controlling of the bio fireplace via the appliance will not be possible.
If Wi-Fi network is ready, prepare the formatted USB flash drive.
Create a text file on USB flash drive with the name ‘wifi’ and ‘txt’ extension.
Save the name of the network and password in the file in a given format, where:
Instead of ‘Wi-Fi Network name’ – enter the name of the network, e.g. ‘home’
Wi-Fi Network Password – password to the network, e.g. ‘mynet’
Example:
