Configuration Information
15
The Active Channel list box will display the user defined channel names. The
user defined channel names are entered in the monitor channel option screens.
If the channel names are not defined, the Active Channel list box will display the
coded names with the following meaning:
Note
The custom display sets that you define may become invalid if monitor channels in the rack
are reconfigured. Whenever you reconfigure monitor channels, use the Display Interface
Module dialog box to delete the reconfigured channels from your custom display sets and
then add the channels to the sets again.
4.2 Defining Display Unit Settings
Display Unit settings let you choose the display mode that appears when the unit
is turned on, the scan rate, and the amount of time before the unit returns from
the channel information screen to the previous display. The Display Settings
dialog box in the 3500 Rack Configuration Software looks like this:
1) Scan time setting and default
scan mode setting box. Default scan
time is set for 5 seconds.
2) Setting for the mode of operation
after the power up or the Display
Reset.
3) Time out setting for the Channel
Information screen and Time on
setting for the LCD back-light. The
screen returns to the previous display
and/or the back-light turns off.
Default setting is 30 minutes.
4) Options for the Display Unit
foreign language support. Default
language setting is English.
The help system that comes with the configuration software defines all of the
fields in this dialog box.
