3500/93 SYSTEM DISPLAY
10
3.5 Independent Mount
1) Install conduit fittings to the independent mount housing.
2) Install the seal kit.
3) Install the independent mount brackets to the Display Unit using 10-32x0.37 Phillips pan
head screws (2 places).
4) Connect the cables.
5) Place the Display Unit on the housing, and use the seal washers, the flat washers and
the 10-32x0.75 screws to clamp down the Display Unit to make a seal between the
Display Unit and the Independent Mount Housing (4 places).
Mounting Hardware
Description
Bently Nevada Part Number
Quantity
Stainless Steel Independent Mount Housing
137835-01
1
3500/93 Independent Mount Bracket
137836-01
2
10-32x0.37 Phillips Pan Head Screw
04344178
4
10-32x0.75 Phillips Pan Head Screw
04344186
4
Neoprene Seal Washer
03810112
4
No. 10 Flat Washer
04281412
4
Conduit Fitting 0.75 NPT
03813103
1
Seal Kit 0.75 Hole
03838117
1
