Bently Nevada 3300/48, Руководство по эксплуатации

Страница: 22 / 79

•
Case Expansion Monitor Operation 84417-01
10 SELF TESTS
e 3 3 0 0 / 4 8
CASE EXPANSION
MONITOR
vommmimor
=
N E E N
=. 8C
H = =
E
E E
X 31. . e X
P . 4
A 3 . mc A
N -3M1 N
S M C S
2l
0 M O
N r N
MN M C
(rmin m r _ o
A M M M E M M I I I
OK 4 ,
OoNo C T O
OALR D I FF0
i l l —BYPASS - - 4 11
BUFFERED TRANSDUCERS
5
6
7
8
10
12
14
17
18
21
22
Error Code Description
2
3
ROM CHECKSUM has failed. *
EEPROM failure number 1.
4 E E P R O M failure number 2.
Adjust set points
+7.5V/-VT node out of tolerance. * *
+VRH node out of tolerance. * *
+5V node out of tolerance. * *
MVREF node out of tolerance. * *
+7.5V node out of tolerance. * *
+VRL node out of tolerance. * *
+5V/-7.5V node out of tolerance. * *
RAM failure. *
COP Watchdog not configured.
+5V/-5V or +15V node out of tolerance.
* *
* * *
* *
Incorrect switch or switch combination. * * * *
Incorrect jumper configuration. *
Tested only at Power Up or User Invoked Self Test. This error is displayed on the front panel
but is not stored in memory.
Tested only at Cyclic Self Test. Errors 2, 3, and 14 are non-recoverable and errors 5 through
13 could be intermittent and recoverable.
Error 4 is a setpoint failure and may be corrected by adjusting all setpoints in the monitor.
Tested only when monitor is in calibration mode.
15