Bentel Security Absoluta 630 4.10, Руководство пользователя

Страница: 39 / 84

Partition 01
AAADDDDD
Ø
the top line of the display shows the label of the se-
lected partition;
Ø
on the bottom line of the display, the flashing charac-
ter represents the status of the selected partition.
+
If you enable the keypad and the access PIN on
partitions above the partition number 8, the display
uses the characters from number 9 to number 16
on the bottom line to show the status of the
partitions.
Press:
Ø
OFF to Disarm the Partition;
Ø
ON to Arm the Partition in Away Mode ;
Ø
A then ON , to Arm the Partition in Stay Mode ;
Ø
B then ON , to Arm the Partition in Instant Stay Mode .
Partition 01
ARMED
Super keys
If your installer has set up the 3 super keys ( 1 , 2 and 3 ),
you will be able to operate your system from the key-
pad, without using PINs, by press and hold key 1, key 2,
or key 3 for at least 3 seconds: an acoustic signal indi-
cates that the command is sent.
+
The actions that the super keys trigger depend on
the control panel programming. For more informa-
tion, ask your installer.
Absoluta Plus and Absoluta 630 OPERATIONS FROM LCD KEYPAD 39
ICON SIGN DESCRIPTION
t
*
p
OFF Installer Disabled.
ON
Blinking
Installer Enabled.
PIN Transfer Enabled.
r
*
OFF Answerphone facility Disabled.
ON Answerphone facility Enabled.
i
OFF Absoluta Plus: Line Free. Absoluta 630: communicator on standby status.
ON Absoluta Plus: Line Busy. Absoluta 630: communicator active.
Blinking Absoluta Plus: Line Down. Absoluta 630: not apply.
Table 7 Other signals.