Bentel Security Absoluta 630 4.10, Руководство пользователя

Страница: 15 / 84

1. Disarm the Partitions as described in “Disarming”:
The display shows time available to use another PIN or
Key.
2. Disarm the Partitions again using a different PIN or
Key before time available expires:
The display message System Disarmed appears if
other PINs or Keys are NOT needed, otherwise it goes
back to the previous step.
n
Auto-arming
If your installer has programmed the Partitions to arm
automatically, they will be armed/disarmed at sched-
uled times, in scheduled modes: ask your installer for
more information.
+
Auto-arming can be enabled/disabled as de-
scribed in “System > Auto-arming”.
When there are just 10 minutes to go before a Partition
is armed automatically, the display, in Standby Status,
shows the auto-arming signalling bar with the count-
down of time remaining:
You can postpone automatic arming by 1 hour as fol-
lows.
1. Enter the Home Screen as described in “Entering
the Home Screen”:
2. Press More Time to postpone automatic arming by
1 hour or press OK to hide the auto-arming notifica-
tion bar.
+
You can postpone automatic arming, up to 3 times
in a day.
See “Menu (User) > Extra Time” to postpone the
auto-arming when there are more than 10 minutes left
before the scheduled time.
n
Arming Block Conditions
The display shows a screen like this one if there are any
conditions that prevent partition arming:
Press Force to arm the partitions in any case or Cancel
to cancel arming.
+
Based on the control panel function mode
(
EN50131 enabled or disabled) you cannot force
some blocking conditions: for more information,
see “Arming Block Conditions” on page 75.
Some blocking conditions can be solved by the user,
others require installer intervention.
Absoluta Plus and Absoluta 630 OPERATIONS FROM TOUCH KEYPAD 15