34
Menu Functions
Basic OSD menu - without input signals connected
As there’s no input signal to your projector, only the submenus of
Settings
under
Basic
OSD menu -
with input signals connected are available. Menu options that are not available will become grayed out.
To access the OSD menu, press
MENU
on the projector or remote control.
• Use the arrow keys (
/
/ /
) on the projector or remote control to move through the menu
items.
• Use
OK
to confirm the selected menu item.
To switch from the Basic OSD menu to the Advanced OSD menu, see page
30
.
Menu
Submenus and Descriptions
Language
Sets the language for the On-Screen Display (OSD) menus.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Choosing a location
for details.
Test Pattern
Enables this function to display the grid test pattern, which helps you adjust the image
size and focus so as to check if the projected image is free of distortion.
Auto Source
Sets whether the projector searches automatically for input sources. Select
On
to
enable the projector to scan for input sources until it acquires a signal. If the function
is set to
Off
, the projector selects the last used input source.
Menu Type
Switches to the
Advanced
OSD menu.
HDMI Format
Selects an input source type for the HDMI signal. You can also manually select the
source type. The different source types carry different standards for the brightness
level.
HDMI Format is only available when the HDMI signal is selected.
Reset Lamp
Timer
Activates this function only after a new lamp is installed. When you select
Reset
, a
"
Reset Successfully
" message displays to notify that the lamp time has been reset to
"0".
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language, Projector Position,
and Reset Lamp Timer.
Information
Displays the following information about your projector.
•
Source
: Displays the current signal source.
•
Picture Mode
: Displays the current
Picture Mode
.
•
Resolution
: Displays the native resolution of the input source.
•
Color System
: Displays input system format.
•
Equivalent Lamp Hour
: Displays the number of hours the lamp has been
used.
•
3D Format
: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
•
Firmware Version
: Displays the firmware version of your projector.
Some information is given only when certain input sources are in use.
