24
Operation
If you forget the password
If you enable the password function, you’ll have to enter your password each time you turn on the
projector. Once you enter an incorrect password, the error message displays, and the
Input Password
window follows.
You can retry by entering another six-digit password, or if you absolutely do not remember it, use the
password recall procedure. See
Entering the password recall procedure
for details.
If you have entered an incorrect password 5 times in succession, the projector will automatically shut
down in a short time.
Entering the password recall procedure
1. Make sure the
Password
window displays on screen, then press and hold
AUTO
on the projector
or remote control for 3 seconds. The projector will display a coded number on the screen.
2. Write down the number and turn off the projector.
3. Seek help from the local BenQ service center to decode the number. You may be required to provide
proof of purchase documentation to verify that you are an authorized user of the projector.
"XXX" shown in the above messages are numbers that vary depending on different models.
• Under the Advanced OSD menu
• Under the Basic OSD menu
• Under the Advanced OSD menu
• Under the Basic OSD menu
Password Error
Please try again.
Password Error
Please try again.
Please write down the recall
code, and contact BenQ
Customer Center.
Recall code:
XXX XXX XXX XXX
Recall Passowrd
Back
Recall Passowrd
XXX XXX XXX XXX
Please write down the recall code, and contact
BenQ Customer Center.
Recall code: