31
Menu Functions
Using the
Basic
OSD menu
Depending on whether or not any video signal is connected to the projector, the
Basic
OSD menu offers
different available functions.
Check the following links to learn more.
•
Basic OSD menu - with input signals connected
•
Basic OSD menu - without input signals connected
(limited menus are available)
Basic OSD menu - with input signals connected
The
Basic
OSD menu provides primary menu functions. Available menu items may vary depending on
the connected video sources or specified settings. Menu options that are not available will become grayed
out.
To access the OSD menu, press
MENU
on the projector or remote control.
• Use the arrow keys (
/
/ /
) on the projector or remote control to move through the menu
items.
• Use
OK
to confirm the selected menu item.
To switch from the Basic OSD menu to the Advanced OSD menu, see page
30
.
Menu
Submenus and Descriptions
Picture Mode
Selects a preset picture mode to suit your operating environment and input signal
picture type.
The preset picture modes are described as below:
•
Bright
: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
•
Cinema
: With well-balanced color saturation and contrast with a low
brightness level, this is most suitable for enjoying movies in a totally dark
environment (as you would find in a commercial cinema).
•
Standard
: Being slightly brighter than
Cinema
mode, it is suitable for use in
rooms where there is a small amount of ambient light.
•
3D
: It is optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
•
User 1
/
User 2
: Recalls the customized settings. Access the
Advanced
OSD
menu and
see
User Mode Management
for details.
The function is accessible through the remote control.
Sound Mode
Selects a sound effect mode to your preference. The following preset sound modes
are provided:
Standard
,
Cinema
,
Music
,
Sport
, and
User
.
To specify the sound settings of the
User
mode, access the
Advanced
OSD menu
and see
User EQ
for details.
If the Mute function is activated, adjusting Sound Mode will turn off the Mute
function.
