Bennett T-75, Инструкция по эксплуатации, обслуживанию и ремонту

Страница: 7 / 26

Bennett T75 Operation, Service, & Parts Manual Product Introduction
5
SECTION 2: PRODUCT INTRODUCTION
PRODUCT INTRODUCTION
The Type 75 pumping unit is a rotary vane type, flammable-liquid pump. They are provided with an integral strainer, pressure relief valve, air
eliminator, and bypass valve, which is set to return liquid, under pressures exceeding 50 psi, to the suction side of the pump. For further
information, please contact the Bennett Technical Service Department at 1-800-423-6638.
FEATURES & CONSTRUCT ION
The T75 pumping unit is fully compatible with the SB-100 Meter, compact and lightweight unit built with the following functions.

Positive Displacement, Sliding Vane Design

Efficient & Low Power Consumption

Standard and High Displacement Flow Rate Models

Integrated & Approved Vortex Style Air Elimination Device

Self-Lubricating Bearings

Threaded test connections for field diagnostics

Internal Outlet Control Valve to Minimize Pressure Surges

Integral Filtration, selection of Micron ranges

Drain plug for servicing and filter replacement

Integrated pressure relief bypass valve (optional adjustable version)

Flanged outlet with direct SB100 Meter connection or 1 3/16” diameter Tube Style Outlet (30 mm)

Integrated Motor Mount Top Cover on Tube Outlet Versions

Flanged Bottom Inlet (Vertically Aligned 1-1/2” NPT) or 4 Bolt Filter Cover Side Inlet Mode

Patented internal design features to reduce the possibility of vapor lock
T75 SERIES MODELS
Type 75D –Standard fuels and Gasoline/Ethanol blends with nominal ethanol concentrations up to 15%
Type 75A – For use with Gasoline/Ethanol blends with nominal ethanol concentrations up to 85%
PRODUCT SPECIFICATIONS
CAUTION: OPERATING THE REMOTE DISPENSER OR SUCTION PUMP AT VOLTAGES AT OR ABOVE THE REQUIRED 120/240VAC IS NOT
RECOMMENDED! FAILURE OR DAMAGE TO THE ELECTRONIC EQUIPMENT CAN OCCUR.
CAUTION : THE AIR ELIMINATOR (COPPER) TUBE MUST REMAIN OPEN TO THE ATMOSPHERE FOR PROPER VENTILATION.
DIMENSIONS
Flanged Outlet Style (Vertical) ........................................................................................................................................................... 12 39/64” (320 mm)
Tubular Outlet Style (Vertical) ............................................................................................................................................................... 11 5/8” (295 mm)
Flanged and Tabular Outlet Style (Horizontal) ........................................................................................................ 8-3/4” x 11-15/16”” (222 x 303 mm)
Flanged and Tabular Outlet Style (Depth) ............................................................................................................................... 11.15/16” (222 x 303 mm)
Weight ........................................................................................................................................................................................................... 36 lbs. (79kg)
U.S. SPECIFICATIONS
Power Requirements @ Maximum Flow & Pressure ............................................................ 22 gpm (80 lpm) at 700 RPM with 3/4 HP Motor (0.55kW)
Maximum Flow Rate ................................................................................................................................................................................ 24 gpm / 90 lpm
Noise Level ................................................................................................................................................................................................................ 72 dB
Maximum Operating Pressure .................................................................................................................................................................................. 50 psi
Maximum Motor Power Requirements ............................................................................................................................................ 1200 watts / 1.2 kW
Bypass Pressure ................................................................................................................................................................................................ Adjustable
Minimum Dry Suction ............................................................................................................................................................................................ 8 in HG
Minimum Wet Suction ......................................................................................................................................................................................... 21 in HG
Micron Filter (

) ........................................................................................................................................................................................................... N/A
Air Elimination ................................................................................................................................................According to OIML, CEE 77.313 Regulation
Pump Curve ............................................................................................................................................................................................. Refer to Figure 2