Bennett Natural Gas Series, Руководство оператора

Страница: 62 / 72

62 123919 Rev C 5-17-18
Continued …
Press ENTER to advance to the next counter.
Cold Start Counter
This code is used to tell the technician how many times a
Cold Start has been performed on the dispenser.
6.3 - Cold Start The display shown in figure D-10c
appears. The Price display shows the dispenser is in
Diagnostics Level 6.2.
The number of Cold Starts that have occurred appears on
the second line of the main display.
Other Failure Counters
6.1– Power Failures
6.2– UART Timeouts
6.3– Cold Starts
6.4 - y9Err 1
6.5 - y9Err 2
6.6 - y9tOt 1
6.7 - y9tOt 2
6.8– y9Err2
6.9– Y9TOT1
6.10– Y9TOT2
6.11-bQErr 1– Invalid response from Side 1 Modbus device. Indicates problem with
communication hub/meter connection.
6.12-bQErr 3– Invalid response from Side 2 Modbus device. Indicates problem with
communication hub/meter connection.
6.13-bQtOt 1-Message timeout from Side 1 Modbus device.
6.14-bQtOt 2– Message timeout from Side 2 Modbus device.
6.15-F1
Error code reported by the side 1 meter the last time a critical error occurred.
6.16-F2 Error code reported by the side 2 meter the last time that an error occurred.
6.15-D1– Shutdown code for last transaction performed on side 1 of the dispenser.
6.16-D2 – Shutdown code for last transaction performed on Side 2 of the Dispenser.
Shutdown Codes:
00– No code
01– Power Lost During Sale
02– Station unavailable set by station equipment
03– User pressed cancel button
04– Handle Lowered
05– Prepay or allocation limit reached
06– Calibration error occurred
07– Process error occurred
09– Flow remained below low flow setpoint
0A– Vehicle Tank Full (CNG ONLY)
0B– Dispenser disarmed by Point of Sale
These counters are used for Engineering and not to be used in the field.
Press the CANCEL button to exit this test. Press the CANCEL button twice to exit Diagnostics.
CStArt
0
Figure D - 10c
dIAg
6.3
How to Use Diagnostics