Bennett Natural Gas Series, Руководство оператора

Страница: 9 / 72

9 123919 Rev C 5-17-18
How to Dispense LNG
To dispense LNG, follow this procedure:
NOTE: Ensure that the dispenser is authorized by
the console.
1. The Card Reader Display (see figure D-1) will ask if
the customer has been trained. If “NO” is selected
instructions will be displayed. If “YES is selected
proceed to step two.
2. Remove the Vent Hose from the holder (see figure
D-2) and attach it to the vent adaptor on the
vehicle’s tank.
3. Remove the nozzle from the holder (see figure D-2)
and attach it to the fill adaptor on the vehicle’s tank.
4. Select the product select button (see figure D-1).
5. The “Sale$” Display and “DGE” Display will reset
with 8s and 0s.
6. At this point the dispenser will begin its recirculation
process.
7. Once the recirculation is complete the dispenser will
begin to fill the vehicle’s tanks.
8. Once the tank is full the dispenser will go into a
Paused State.
9. If the vehicle has two tanks the customer removes
both hoses and installs them into the adaptors for
the other tank. If the vehicle only has one tank the
customer disconnects the hoses and hangs them up
in the holder (see figure D-2), ending the
transaction.
10. Once the second tank is hooked up the customer
presses the Pause / Resume button near the
Product Select Button (see figure D-1) to fill the
second tank.
11. Once the second tank is full the dispenser will return
to a Paused State.
12. At this time the customer will remove both hoses
and hang them up in the holder (see figure D-2),
ending the transaction.
Figure D-2
How to Operate the Dispenser
Vent Hose Nozzle
Figure D-1
Product Select Button
Card Reader Display