Bennett Natural Gas Series, Руководство оператора

Страница: 14 / 72

14 123919 Rev C 5-17-18
NOTE: If Menu Code 2 totals are being read or the re-settable meter totals, continue with Step 5.
If not, wait 30 seconds for the displays to return to the idle mode, or lift a pump handle to the
ON position to return to the idle mode.
4. Tap the magnet over the “mass units” print again and
the Money totals for Product 2 appear as in Figure T-
1. Repeat steps 2 and 3 for the Product 2 totals and
the remaining hoses on this side of the dispenser
5. If all Menu Code 1 totals have been displayed, tap
the magnet over the “mass units” print again to view
the Menu Code 2 Meter Totals for Product 1. The
display appears as in Figure T-7 when the display is
in Menu Code 2.
By successively tapping the magnet over the “mass
units” print, the dispenser moves through the meter
totals for each hose.
6. If all Menu Code 2 totals have been displayed, tap
the magnet over the “mass units” print again to view
Menu Code 26 Re-settable Meter Totals for Product
1. The display appears as in Figure T-6.
NOTE: These menu codes can be matched up in
Menu Code 05 for the Electro-mechanical totals.
How to Operate the Dispenser
456
7890.12
Figure T-7
Menu 26
P1 = Product 1 Resettable Meter Totals
P1.d