21
123919 Rev C 5-17-18
3. Press the
ENTER
button. If access is gained, the four
dashes disappear and the PPM display appears as in
Figure 3.2. If the dashes do not move, an error was
made entering the access code. Repeat steps 2, 3,
and 4.
DO NOT PRESS ENTER. IF ENTER IS
PRESSED, THE NEW ACCESS CODE WILL BE
0000.
4. Press the
button (see figure 3.4). The display show
all zeros (see figure 3.5).
5. Enter a new four digit number on the keypad. The
number appears in the mass display. Make sure the
number displayed is correct. Record the number
chosen as the access code.
6. Press the
ENTER
button to save the new access
code.
7. Test the new access code.
To test the access code, follow this procedure:
1. Put the dispenser in the
“OPERATE”
mode by
unplugging the manager’s keypad from the dispenser.
Then re-enter the “
ATTENDANT
” mode by plugging
the keyboard back in.
2. Press
ENTER
for Side 1.
3. Press the 3 button and then the
MODE
button on the
keypad.
4. Press the new four digit access number. Four dashes
appear in the mass display.
5. Press the
ENTER
button. If access is gained, the four
dashes disappear and the main price display appears
as in Figure 3.2. If the dashes do not appear, an error
was made. Repeat Steps 1 through 4.
NOTE: If a mistake is made or the new pass code is
lost then the pumps main memory will have to be
zeroed to regain access to totals information and
programming menus. Please call the Bennett
authorized service technician to zero the
dispenser’s main menu and return the pass code
to 2218. This is not a warranty paid service call.
Figure 3.5
PASS
0000
CodE
-- 3
How to Program the Dispenser for Operation
Figure 3.4
Содержание Natural Gas Series
Страница 68: ...68 123919 Rev C 5 17 18...
Страница 69: ...69 123919 Rev C 5 17 18...
Страница 70: ...70 123919 Rev C 5 17 18...
Страница 71: ...71 123919 Rev C 5 17 18 Page Intentionally Left Blank...
