Benelli Tornado Tre Novicento 903, Руководство по ремонту, Страница: 55 / 336

UK
55
MF9_UK
T T
T T
L I M I T E D E D I T I O N
Remove the filtering element (3) situated inside the filter box.
Wash the filtering element with solvents specific for this use
and leave it to dry in the open air.
Apply a specific oil to the entire surface of the filtering element.
NOTE:
Check that the filtering element is always positioned
with its side of major density turned upwards.
WARNING:
Before re-inserting the filtering element into the air
box, eliminate the excess of oil by squeezing the
element that must not drip.
Re-position the filtering element.
Position the air box cover (2) and fix it with the nine screws.
Mount the tank (see “MOUNT TANK“).
3.4 GAS COMMAND PLAY
Remove the internal instrumentation fastenings (see
“DISMANTLE INTERNAL INSTRUMENTATION
FASTENINGS“).
Remove the small cap (see “DISMANTLE SMALL CAP“).
Remove the lower cowling (see “DISMANTLE LOWER
COWLING“).
Remove the left and right upper cowling (see “DISMANTLE
LEFT AND RIGHT UPPER COWLING").
Remove the tank (see “DISMANTLE TANK“).
Remove the air box conduits (see“DISMANTLE AIR BOX“).
Remove the air box (see“DISMANTLE AIR BOX“).
The first adjustment is made during the installation of the gas
command cables.
Move the two rubber protections (1).
Loosen the counter-nut (2).
Carry the adjusters to the bottom of the stroke (3).