Benelli Tornado Tre Novicento 903, Руководство по ремонту, Страница: 326 / 336

UK
326
MF9_UK
T T
T T
L I M I T E D E D I T I O N
10.3 PRELINIMARY OPERATIONS
• Connect the supplied cables to the instrument.
• Switch the instrument on.
• Move with the horizontal or vertical buttons inside the menu.
• Select the item wanted with the "enter" key.
• Follow the indications supplied.
10.4 SELF-DIAGNOSIS
• The self-diagnosis system reads the information dialoging directly with the con-
sole (ECU) of the vehicle.
• It reads the functional parameters of all the devices connected to the console.
• It acquires automatically eventual faulty codes.
• It modifies a number of engine management parameters.
Procedure:
1. Carry out the procedure described in "Preliminary operations", selecting "self-
diagnosis" and pressing "ENTER".
2. Select "DATABASE" with the horizontal arrows
3. Press “ENTER”
4. From the "SELECT TRADEMARK" menu select “Benelli”
5. Press “ENTER”
6. From the "SELECT MODEL" menu select “Tornado Three”
7. Press “ENTER”
8. From the "MOTORISATION" menu select “898”
9. Press “ENTER”
10. From the "SYSTEM TYPE" menu select "INJECTION"
11. Press “ENTER”
12. The "FRAME CODE" menu is not defined, press “ENTER”
13. From the "PLANT TYPE" menu select “Sagem”
14. Press “ENTER”
15. The "VERSION"Il menu is not defined, press “ENTER”
16. Follow the instructions seen on the instrument and press “ENTER”
17. At this point the instrument is in communication with the console.
• With the “+” and “-” keys it is possible to scroll the following menus, identified by
icons
1. ENGINEERING PARAMETERS (icon °C mV mS)
2. PRESENT AND MEMORISED ERRORS (icon generic danger)
3. FUNCTION OF STATES (icon 0 1)
4. ACTIVATION FUNCTION (injector icon)
5. ADJUSTMENTS (screwdriver and hammer icon)
10.5 SET THROTTLE
1. Carry out the procedure described for self-diagnosis
2. Go to ENGINEERING PARAMETERS page (icon C°....)
3. Look for the "correct throttle position" item with the horizontal arrows (if not
already present on the display).
4. Press “ENTER” to see the parameter value (this value with the engine off and
the panel lit must be equal to 0%)
5. if the value is other than 0%, proceed as follows
6. Go to the ADJUSTMENTS page (icon screwdriver and hammer)
7. Using the vertical arrows position yourself on the "Set throttle" line
8. Press “ENTER” and follow the instructions supplied by the instrument