BENEKOV S16, Руководство по эксплуатации и установке

Страница: 22 / 39

22
5. Boiler placement and installation
5.1. Regulations and directives
A boiler for solid fuels can be installed by an organization authorized to install these devices.
The installation must be made in accordance with the project subject to applicable regulations.
The heating system must be filled with water that meets the requirements of CSN 07 7401: 1992 and
importantly its hardness must not exceed the required parameters.
Tab. no. 12 Heating water parameters
Parameter
Unit Value
Hardness mmol/l 1
Ca
2+
mmol/l 0,3
Concentration of total Fe + Mn mg/l 0.3 (recommended value)
A) Regarding the heating system
Č
SN EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, hand and
automatically stocked, nominal heat output of up to 500 kW - Terminology,
requirements, testing and marking.
Č SN 06 0310 2014 Heating systems in buildings - Design and installation
Č
SN 06 0830:2014 Heating systems in buildings - Safety devices
Č SN 07 7401:1992 Water and steam for thermal energy equipment with working pressure up to
8 MPa
B) Regarding chimney
Č SN 73 4201:2010 Chimneys and flues - Design, implementation and connection of fuel
consumers
C) Regarding fire regulations
Č SN 06 1008:1997 Fire safety of heat installations
Č
SN EN 13 501-1+A1:2010 Fire classification of construction products and building structures - Part 1:
Classification according to the results of response to fire tests
D) Regarding the electric network
Č SN 33 0165:1992 Regulations for electrical engineering. Marking of wires with colours or
numbers Executive provisions
Č SN 33 1500:1990 Regulations for electrical engineering. Revisions of electrical equipment
Č SN 33 2000-1 ed.2:2009 Low-voltage electrical installations - Part 1: Basic terms, determination of
basic characteristics, definitions