BendPak MD-6XP Скачать руководство пользователя страница 5

Страница: 5 / 44

MD-6XP Mid-Rise Scissor Lift

P/N 5900108 — Rev. F — March 2020

Symbols

Following are the symbols used in this manual:

⚠

DANGER

Calls attention to an immediate hazard that

will

result in injury or death.

⚠

WARNING

Calls attention to a hazard or unsafe practice that

could

result in injury or death.

⚠

CAUTION

Calls attention to a hazard or unsafe practice that could result in minor personal
injury, product, or property damage.

NOTICE

Calls attention to a situation that, if not avoided, could result in product or property
damage.

Tip

Calls attention to information that can help you use your product better.

Liability Information

BendPak Inc. assumes

liability for damages resulting from:

• Use of the product for purposes other than those described in this manual.
• Modifications to the equipment without prior, written permission from BendPak Inc.
•

Injury or death caused by modifying, disabling, overriding, or removing safety features.

• Damage to the equipment from external influences.
• Incorrect operation of the equipment.

Содержание MD-6XP












































Результаты поиска

Содержание MD-6XP

Отзывы:

BendPak MD-6XP, Инструкция по установке и эксплуатации, Страница: 5 / 44

Результаты поиска

Содержание MD-6XP

Отзывы: