BendPak MD-6XP, Инструкция по установке и эксплуатации

Страница: 4 / 44

MD-6XP Mid-Rise Scissor Lift
4
P/N 5900108 — Rev. F — March 2020
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before
you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
Do not sign the bill of lading until after you have inspected the shipment.
If any of the
items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier
makes a notation on the bill of lading that lists the missing and/or damaged goods.
If you discover missing or damaged goods
after
you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs. Our willingness to assist in helping you process your claim
does not make us responsible for collection of claims or replacement of lost or damaged materials.
Safety Considerations
Read this manual carefully before using your new product.
Do not set up or operate
the product until you are familiar with all operating instructions and warnings. Do not allow anyone else
to operate the product until they are also familiar with all operating instructions and warnings.
General Safety Information
• The product is a mid-rise scissor Lift. Use it only for its intended purpose. Do not make any
modifications to the product.
• The product should only be operated by authorized personnel.
• You must wear OSHA-approved (publication 3151) personal protective equipment at all times
when installing, using, maintaining, or repairing the Lift: leather gloves, steel-toed work boots, eye
protection, back belts, and hearing protection are
mandatory .
• Keep loads centered and balanced on the Lift.
• Never exceed the rated capacity of the Lift.
• When the product is in use, keep all body parts away from it.
• Make sure all operators read and understand the
Installation and Operation Manual
. Keep the
manual near the device at all times.
• Make a visual inspection of the product before using it. Check for damage or missing parts. Do not
use the product if you find any issues. Instead, take it out of service, then contact your dealer,
email support@bendpak.com , visit bendpak.com/support , or call (800) 253-2363 .
• Make a thorough inspection at least once a year. Replace any damaged or severely worn parts,
decals, or warning labels.