BendPak HD-7ZM, Инструкция по установке и эксплуатации

Страница: 9 / 56

9
MODEL HD-7MZ
Lifting Capacity 7,000 Lbs. / 3,175 Kg
A Overall Width 110” / 2,800 mm
B Outside Length 198” / 5,028 mm
C Overall Length 213” / 5,412 mm
D Height of Columns 158” / 4,010 mm
E – Min. Runway Height 5” / 125 mm
F – Max. Rise 140” / 3556 mm
G Max. Lifting Height 145” / 3,681 mm
H Width Between Columns 100” / 2,546 mm
I Runway Width 19” / 482 mm
J Width Between Runways (*) NARROW SETTING 38” / 963 mm
J Width Between Runways (*) WIDE SETTING 44” / 1121 mm
K Runway Centerline (*) NARROW SETTING 56.8" / 1445 mm.
K Runway Centerline (*) WIDE SETTING 63” / 1603 mm.
L Outside Edge of Runways (*) NARROW SETTING 75-1/2” / 1927 mm.
L Outside Edge of Runways (*) WIDE SETTING 82” / 2085 mm.
M Drive Thru Clearance 86-1/2" / 2201 mm.
N Length of Runways 188” / 4,788 mm
Min. Wheelbase @ Rated Capacity 135" / 3429 mm.
Min. Wheelbase @ 75% Capacity 115" / 2921 mm.
Min. Wheelbase @ 50% Capacity 95" / 2413 mm.
Min. Wheelbase @ 25% Capacity 80" / 2032 mm.
Locking Positions 30
Lock Spacing Every 4” / 101 mm
Lifting Time 80 Seconds
Standard Motor(**) 220 VAC / 60Hz 1 Ph.
* This dimension may be limited with the addition of rolling jacks. See Rolling Jack Specifications on Separate page.
** Special Voltages Available upon Request.
The design, material and specifications are subject to change without notice.
*IMPORTANT NOTE*
Check Diagonal Measurements
To Ensure Square Layout Diagonal Measurements Must Be Equal.
FLOOR PLAN