HD-7500 Series Four-Post Lifts
63
P/N 5900174 — Rev. C — March 2021
Using the Controls
The Controls for the Lift include:
•
Up button
. Press and hold to raise the Runways. Located near the top of the Power Unit.
To put Runways onto a Safety Lock position
: Raise the Runways a little above where you
want them, then press and hold the Lowering Handle to back the Runways down onto the Safety
Locks (
do not
press and hold the pushbutton on the Pushbutton Air Valve). When the Runways
stop going down, they are engaged on a Safety Lock.
Before leaving the Lift, make sure all four corners are engaged on Safety Locks at the same height.
•
Lowering Handle
. Press and hold to lower the Runways. Located in the middle of the Power
Unit, the Lowering Handle is long and has a ball at the end.
To lower raised Runways down to the ground
:
press and hold
the pushbutton on the
Pushbutton Air Valve first, then
press and hold
the Lowering Handle.
Watch the Runways as they go down to make sure they are coming down evenly. If they are not,
stop lowering the Lift and troubleshoot the problem.
⚠
WARNING
Only leave your Lift either engaged on Safety Locks or fully lowered.
•
Pushbutton Air Valve
. Press and hold as part of the process to lower the Runways. Located
on one side or the other of the Power Unit (depending on where it was installed). Pressing and
holding the pushbutton on the Pushbutton Air Valve disengages the Safety Locks, which is needed
to lower the Runways.
To raise Runways and
engage them on Safety
Locks:
1.
Press and hold Up
Button.
2.
When just past desired
height, release Up
Button.
3.
Press and hold Lowering
Handle.
4.
Runways stop going
down when engaged on
Safety Locks; release
Lowering Handle when
they stop.
Do
not
press and hold
Pushbutton.
5.
Make sure all four Posts
are engaged at same
height.
To lower Runways:
1.
Press and hold Up
Button for a couple of
seconds; this moves Lift
off Safety Locks.
2.
Press and
hold
Pushbutton.
3.
Press and
hold
Lowering Handle.
Runways begin lowering.
4.
When Runways are fully
lowered (on ground),
release Pushbutton and
Lowering Handle.
Содержание HD-7500 Series
