background image

3

KEY CONTENTS

(See the full index on pages 60-59)

1.0  Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-10
1.4   What to Expect When Using the Bendix

 Wingman

Advanced System . . . . . . . . . . . . . . . . . . . . .  5-6

1.5   How the Driver Interacts
 

with Bendix Wingman Advanced . . . . . . . . . . . . . . . . . . . . 7

1.8   Alerts and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . .  8-10
2.0  Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11-12
3.0  Introduction to Troubleshooting . . . . . . . . . . . . . . . . .  13-16
3.2   Narrowing Down the Problem (Table 3.2) . . . . . . . . .  14-15
4.0  Troubleshooting/Diagnostics  . . . . . . . . . . . . . . . . . .  17-27
4.1  Bendix

®

 ACom

®

 Diagnostics Software  . . . . . . . . . . . . . . 17

4.3  Diagnostic Trouble Codes (DTCs)  . . . . . . . . . . . . . .  19-25
5.0  Other System Features . . . . . . . . . . . . . . . . . . . . . . .  28-31

Appendices A - H  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32-59

1.0 OPERATION SECTION

Section Index

1.1 

Important Safety Information/

 

When Not to Use Bendix

®

 Wingman

®

 Advanced

 

Adaptive Cruise Control with Braking  .  .  .  .  .   3

1.2 

System Components.  .  .  .  .  .  .  .  .  .  .  .  .  .   4

1.3 

Activating the Bendix Wingman 

 

Advanced System  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   4

1.4 

What to Expect When Using The

 

Wingman Advanced System .  .  .  .  .  .  .  .  .   5-6

1.5 

How a Driver Interacts with the 

 

Wingman Advanced System .  .  .  .  .  .  .  .  .  .   7

1.6 

Following Distance .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   8

1.7 

Wingman Advanced Collision Mitigation

 

Feature Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   8

1.8 

Alerts and Warnings  .  .  .  .  .  .  .  .  .  .  .  .  . 8-10

1.9 

Wingman Advanced Diagnostic

 

Trouble Codes .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10

1.10  Radar Sensor Interchangeability.  .  .  .  .  .  .  . 10
1.11  Alert Volume  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10
1.12  Potential False Warnings   .  .  .  .  .  .  .  .  .  .  . 10

1.1 IMPORTANT SAFETY INFORMATION

The driver is always responsible for the control and 
safe operation of the vehicle at all times.  The Bendix 
Wingman Advanced system does not replace the 
need for a skilled, alert professional driver, reacting 
appropriately and in a timely manner, and using safe 
driving practices.

This vehicle's cruise control must be used only in the same 

conditions  that  are  normally  recommended  for  ordinary 

cruise control.

Vehicle  manufacturers  may  use  alerts,  messages,  and 

dash arrangements that vary from the examples shown 

here.  Consult the vehicle operator’s manual for applicable 

details regarding use and operation.

WHEN NOT TO USE BENDIX WINGMAN 
ADVANCED ADAPTIVE CRUISE 
CONTROL WITH BRAKING

The adaptive cruise control with braking feature in 
Wingman Advanced is automatically ready when 
normal cruise control is set.

 WARNING:  This vehicle’s cruise control must be 

used only in the same conditions that are normally 
recommended for ordinary cruise control.  As noted 
below, there are certain situations when cruise control 
should NOT
 be used.

Inclement Weather/Low Visibility 
Situations 

– Do not use cruise control 

in  inclement  weather  or  low  visibility 

conditions such as rain, snow, smoke, fog, 

ice or other severe weather conditions 

that may affect the performance of the 

Wingman Advanced system.

Dense Traffi c 

– Do not use cruise control 

in heavy traf

fi c.

Sharp Curves and Winding Roads 

Do not use cruise control when traveling 

sharply  curved  or  winding  roadways. 

CAUTION: Road curvature may impact 

the radar’s ability to track vehicles ahead 

in the same lane.

Entrance or Exit Ramps

 – Do not use 

cruise control when entering or exiting 

roadways.

Downhill Grades 

– Do not use cruise 

control on downhill grades.

Construction Zones

 – Do not use cruise 

control in construction zones.

Off-Road 

– Do not use cruise control in 

off-road conditions.

Smaller Forward Vehicles

  –  Smaller 

vehicles, such as motorcycles, may be 

dif

fi cult for the radar to identify.  It is the 

driver’s  responsibility  to  be  aware  of 

these types of vehicles and to slow down 

if necessary.

Visit www.bendix.com for more information along with any updates 
to these limitations and restrictions.

Содержание Wingman FLR20

































































Отзывы: