Bender UNIMET 300ST, Руководство по эксплуатации

Страница: 54 / 62

Data
54 TGH1365en/10.2012
7.2 Test steps
A classified test sequence with the UNIMET
®
300ST comprises a number of individual test steps. The
test steps are sorted on the basis of measurement numbers.
Meas
No.
Name of measurement Short text Unit Standard
3 PE conductor resistance, permanently
attached cable R-PE Ohm VDE 0701-0702
+ IEC 62353
4 Protective earth resistance, installed
equipment R-PE Ohm VDE 0701-0702
+ DIN EN 62353
5 Insulation resistance, Protection Class II R-ISO CII MOhm IEC 62353
6 Insulation resistance, Protection Class I R-ISO CI MOhm IEC 62353
106 Insulation resistance, Protection Class I R-ISO CI MOhm VDE 0701-0702
107 Insulation resistance, Protection Class II R-ISO CII MOhm VDE 0701-0702
120 Insulation resistance, cable R-ISO MOhm VDE 0701-0702
44 Equipment leakage current Protection
Class I - alternative measurement I-ELC-A CI mA IEC 62353
46 Equipment leakage current -
Protection Class II - alternative
measurement I-ELC-A CII mA IEC 62353
109 Equipment leakage current Protection
Class 1 -alternative measurement I-ELC-A CI mA VDE 0701-0702
110 Equipment leakage current Protection
Class II -alternative measurement I-ELC-A CII mA VDE 0701-0702
80 Load current measurement A VDE 0701-0702
+ DIN EN 62353
81 Operating voltage V VDE 0701-0702
+ DIN EN 62353
82 Power consumption kVA VDE 0701-0702
+ DIN EN 62353
111 PE conductor current - Direct
measurement I-PE Direct mA VDE 0701-0702
112 PE conductor current - Direct
measurement - Phase reversed I-PE Direct Ph-r mA VDE 0701-0702
113 PE conductor current - Differential
measurement I-PE Differential mA VDE 0701-0702
114 PE conductor current - Differential
measurement - Phase reversed I-PE Differential Ph-r mA VDE 0701-0702