iso415R-x_D00401_00_M_XXEN / 04.2021 7
ISOMETER® iso415R
www.bender.de/en -> Service & support.
1.8
Safety
If the device is used outside the Federal Republic of Germany, the applicable local standards and
regulations must be complied with. In Europe, the European standard EN 50110 applies.
I
D
anger
!
Risk of fatal injury due to electric shock!
Touching live parts of the system car-
ries the risk of:
- a
fatal
eleCtriC
shoCk
- D
amage
to
the
eleCtriCal
installation
- D
estruCtion
of
the
DeviCe
B
efore
installing
anD
ConneCting
the
DeviCe
,
make
sure
that
the
installation
has
Been
De
-
energiseD
. t
he
rules
for
Working
on
eleCtriCal
systems
must
Be
oBserveD
.
1.9
Intended use
The ISOMETER® is an insulation monitoring device according to IEC 61557-8 for IT systems. It mon-
itors the insulation resistance of unearthed 3(N)AC, AC and DC main and control circuits (IT sys-
tems). The range of application and the maximum permissible system leakage capacitance of the
different models are specified in the chapter "Technical data".
The DC components existing in AC/DC systems can have an influence on the response behaviour
if an insulation fault occurs downstream of rectifiers with an electrolytic capacitor.
The separate supply voltage of the iso415R-24 also makes it possible to monitor a de-energised
system.
Intended use implies:
•
Observance of all information in this operating manual
•
Compliance with test intervals
In order to meet the requirements of applicable standards, customised parameter settings must
be made on the equipment in order to adapt it to local equipment and operating conditions.
Please heed the limits of the area of application indicated in the technical data.
Any other use than that described in this manual is regarded as improper.
Содержание ISOMETER iso415R
Страница 30: ...30 iso415R x_D00401_00_M_XXEN 04 2021 ...
Страница 31: ...iso415R x_D00401_00_M_XXEN 04 2021 31 ISOMETER iso415R ...
