Bender ISOMETER iso415R Скачать руководство пользователя

Страница: 5 / 32

iso415R-x_D00401_00_M_XXEN / 04.2021 5

ISOMETER® iso415R

General instructions

1.1

How to use this manual

This manual is intended for qualified personnel working in electrical engineering and elec-

tronics!

Part of the device documentation, in addition to this manual, are the enclosed

"Safety instructions for Bender products".

Read the manual before mounting, connecting and commissioning the device.

Always keep the manual within easy reach for future reference.

1.2

Indication of important instructions and information

anger

Indicates a high risk of danger that will result in death or serious injury if not

avoided.

arning

Indicates a medium risk of danger that can lead to death or serious injury if not

avoided.

aution

Indicates a low-level risk that can result in minor or moderate injury or damage to

property if not avoided.

Information can help to optimise the use of the product.

1.2.1 Signs and symbols

Disposal

Recycling

Temperature range

Protect from moisture

Protect from dust

RoHS directives

1.3

Training courses and seminars

www.bender.de/en -> Know-how -> Seminars.

1.4

Delivery conditions

The conditions of sale and delivery set out by Bender apply. These can be obtained from Bender
in printed or electronic format.

The following applies to software products:

"Software clause in respect of the licensing of standard software as part of deliveries,
modifications and changes to general delivery conditions for products and services in

Die Elektroindustrie

Содержание ISOMETER iso415R

































Результаты поиска

Содержание ISOMETER iso415R

Отзывы:

Похожие инструкции для ISOMETER iso415R

Бренды по названию

Популярные бренды

Bender ISOMETER iso415R, Руководство пользователя

Результаты поиска

Содержание ISOMETER iso415R

Отзывы:

Похожие инструкции для ISOMETER iso415R

Бренды по названию

Популярные бренды