Bender COMTRAXX CP305 Скачать руководство пользователя страница 53

Страница: 53 / 72

COMTRAXX® CP305 - Control Panel

12.6

Clock

Setting option for

•

Time, date, time zone, daylight saving time

•

Synchronisation with time server (SNTP) (auto DHCP, on, off )

12.7

Display

General

•

Language

•

Alignment

•

Cleaning mode active
Setting option: deactivated or locked for 5…20 s

Alarm messages

•

Set the time until the page is changed for several pending alarms.
Setting range: 3/5/10 seconds

Standby mode

•

Standby mode (off, auto dim, display time)

•

Timeout (display) after 1…10 minutes

•

Brightness “off”, 10…90%

In the event of an alarm, the display is always at 100% brightness. Only after the alarm has
been eliminated does the CP305 go into standard operation with the configured standby
mode.

12.8

Security

The PIN for logging in to the device and the password for logging in to the web user interface are
independent of each other.

Display

The PIN for logging in to the device consists of 4 digits.
The factory setting is "8070".

•

PIN (enabled/disabled)

•

PIN (change PIN)

CP305_D00425_00_M_XXEN_09.2022

Содержание COMTRAXX CP305









































































Результаты поиска

Содержание COMTRAXX CP305

Отзывы:

Bender COMTRAXX CP305, Руководство пользователя, Страница: 53 / 72

Результаты поиска

Содержание COMTRAXX CP305

Отзывы: