Bender COMTRAXX CP305 Скачать руководство пользователя страница 35

Страница: 35 / 72

COMTRAXX® CP305 - Control Panel

Element

Comments

Number of the error message
in the history

Path specification

Address where the error occurred

Type

Alarm start, alarm end, error, device restart

Time stamp

Occurrence and end of the error

10.4

Alarm and test

Alarm addresses

Display of the addresses/measuring channels whose alarm messages are assigned to the CP305.

The following are shown:

•

BMS address/channel

•

Device name

•

Path to the alarm value

•

Alarm group

•

Buzzer on/off

•

Buzzer profile

•

Buzzer delay

•

Relay on/off (CP305-IO)

The alarm addresses are configured in the web user interface.

Alarm groups

Several measuring channels can be consolidated into one alarm group. The configuration is done
in the web user interface.

Test addresses

Display of the stored test addresses. The configuration is done in the web user interface.

You start the test by pressing the TEST button in the footer of the default display screen.
Depending on the scope of the test, it may take a few minutes. The result is displayed after the
test.

The TEST button only appears if at least one test address has been set up.

CP305_D00425_00_M_XXEN_09.2022

Содержание COMTRAXX CP305









































































Результаты поиска

Содержание COMTRAXX CP305

Отзывы:

Bender COMTRAXX CP305, Руководство пользователя, Страница: 35 / 72

Результаты поиска

Содержание COMTRAXX CP305

Отзывы: