Benchmark BoilerMate BMA 125 OV, Инструкции по проектированию, установке и обслуживанию

Страница: 2 / 45

Page 2
CONTENTS
Section Page
1.0 DESIGN
1.1 Introduction 3
1.2 Technical
Data 5
1.3 System Details 11
2.0
INSTALLATION
2.1 Site Requirements 19
2.2 Installation 20
2.3 Commissioning 30
3.0 SERVICING
3.1 Annual Servicing 34
3.2 Changing Components 34
3.3 Short Parts List 35
3.4 Fault
Finding 36
Appendix A 37
Appendix B 38
Appendix C 41
Appendix D 42
Terms & Conditions 43
The Gledhill BoilerMate range is a WBS
listed product and complies with the WMA
Specifi cation for integrated thermal storage
products. The principle was developed in
conjunction with British Gas. This product
is manufactured under an ISO 9001:2000
Quality System audited by BSI.
Patents Pending
The Gledhill Group’s fi rst priority is to give a
high quality service to our customers.
Quality is built into every Gledhill product
and we hope you get satisfactory service
from Gledhill.
If not please let us know.
ISSUE 8: 06-08
TM
benchmark
The code of practice for the installation,
commissioning & servicing of central heating systems
Building Regulations and Benchmark Commissioning
The Building Regulations (England & Wales) require that the installation of a
heating appliance be notifi ed to the relevant Local Authority Building Control
Department. From 1st April 2005 this can be achieved via a Competent Person
Self Certifi cation Scheme as an option to notifying the Local Authority directly.
Similar arrangements will follow for Scotland and will apply in Northern Ireland
from 1st January 06.
CORGI operates a Self Certifi cation Scheme for gas heating appliances.
These arrangements represent a change from the situation whereby compliance
with the Building Regulations was accepted if the Benchmark Logbook was
completed and this was then left on site with the customer).
With the introduction of a self certifi cation scheme, the Benchmark Logbook is
being replaced by a similar document in the form of a commissioning check list
and a service interval record is included with all gas appliance manuals. However,
the relevant Benchmark Logbook is still being included with all Thermal Storage
products and unvented cylinders.
Gledhill fully supports the Benchmark aims to improve the standards of installation
and commissioning of central heating systems in the UK and to encourage the
regular servicing of all central heating systems to ensure safety and effi ciency.
Building Regulations require that the heating installation should comply with
the manufacturer’s instructions. It is therefore important that the commissioning
check list is completed by the competent installer. This check list only applies to
installations in dwellings or some related structures.