ben-e-bike TWENTYFOUR E-POWER PRO Скачать руководство пользователя страница 21

Страница: 21 / 63

21 BEN-

OPERATION OF THE BRAKES

If there is insufficient grip, the braking distance will be extended and the tires may become blocked, e.g. in frost,

rain, sandy roads or leaves on the track.

•

Explain to your child that it is necessary to adapt t

•

Explain to your child that he / she has to drive slowly if there is insufficient grip.

•

Explain to your child that locked wheels

avoided at any time.

•

Explain to your child that heavy use of the front brake may lead to a lifting rear wheel which could even

cause a rollover.

The rear wheel tends to lock at the same braking force earlier than the front wheel

PULLING THE BRAKE LEVERS

•

Pull the hand brake lever with your fingers in the direction of the handlebar

•

Modulate the braking force with the force with which you pull the handbrake lever.

•

To release the brake, release the handbrake lever.

•

The front brake is operated with the left lever and the rear brake with the right lever.

OPERATIN OF THE GEAR SHIFT

Distraction and incorrect use of the gear shift may lead to accidents

•

Familiarize yourself and your child with the function of the gearshift (see chapter "Before th

•

Explain to your child that it is only allowed to use the gearshift if this does not affect the attention to the

traffic.

The gearshift may be damaged due to wrong operation

-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

If there is insufficient grip, the braking distance will be extended and the tires may become blocked, e.g. in frost,

rain, sandy roads or leaves on the track.

is necessary to adapt the driving style to road conditions.

Explain to your child that he / she has to drive slowly if there is insufficient grip.

locked wheels (especially the front wheel) due to heavy braking should be

Explain to your child that heavy use of the front brake may lead to a lifting rear wheel which could even

lock at the same braking force earlier than the front wheel.

l the hand brake lever with your fingers in the direction of the handlebar for braking

the braking force with the force with which you pull the handbrake lever.

To release the brake, release the handbrake lever.

with the left lever and the rear brake with the right lever.

OPERATIN OF THE GEAR SHIFT

Distraction and incorrect use of the gear shift may lead to accidents.

Familiarize yourself and your child with the function of the gearshift (see chapter "Before th

Explain to your child that it is only allowed to use the gearshift if this does not affect the attention to the

The gearshift may be damaged due to wrong operation.

BIKE INSTRUCTION MANUAL

www.ben-e-bike.net
[email protected]

If there is insufficient grip, the braking distance will be extended and the tires may become blocked, e.g. in frost,

ad conditions.

Explain to your child that he / she has to drive slowly if there is insufficient grip.

due to heavy braking should be

Explain to your child that heavy use of the front brake may lead to a lifting rear wheel which could even

for braking.

the braking force with the force with which you pull the handbrake lever.

with the left lever and the rear brake with the right lever.

Familiarize yourself and your child with the function of the gearshift (see chapter "Before the first ride").

Explain to your child that it is only allowed to use the gearshift if this does not affect the attention to the

Содержание TWENTYFOUR E-POWER PRO
































































Результаты поиска

Содержание TWENTYFOUR E-POWER PRO

Отзывы:

Похожие инструкции для TWENTYFOUR E-POWER PRO

Бренды по названию

Популярные бренды

ben-e-bike TWENTYFOUR E-POWER PRO, Руководство пользователя

Результаты поиска

Содержание TWENTYFOUR E-POWER PRO

Отзывы:

Похожие инструкции для TWENTYFOUR E-POWER PRO

Бренды по названию

Популярные бренды