ben-e-bike TWENTYFOUR E-POWER PRO Скачать руководство пользователя страница 31

Страница: 31 / 63

31 BEN-

ADJUSTMENT OF THE SUSPENSION FORK

If your BEN-E-BIKE is not equipped with a rigid but an air suspension fork,

to the driver's weight by changing the air pressure in the air chamber of the

If you want to change the spring stiffness

do not have such a pump, contact your

to pump up the suspension fork. Irreparable damage to the seals is

Please note that the fork should be already compressed slightly

called negative spring travel ("SAG"). If the air pressure is too high,

wheel loses contact to the ground more quickly. Useful is a negative spring travel of about 15

case of the "SMOOTHER" fork means a compression of about 15

For convenience the fork has a rubber ring

pressure:

•

Push the rubber ring all the way down and place the BEN

•

Now lift your child onto the saddle so that it does not touch the ground wi

BEN-E-BIKE with all its weight, thereby compressing the suspension fork.

•

If the air pressure in the fork is correct, it should be compressed by about 15 mm.

-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

NSION FORK

BIKE is not equipped with a rigid but an air suspension fork, the stiffness of the fork can be adapted

to the driver's weight by changing the air pressure in the air chamber of the left fork leg

g stiffness of the suspension fork, you need a so-called "damper pump". If you

contact your dealer for help. Never use an ordinary tire pump or even a compressor

to pump up the suspension fork. Irreparable damage to the seals is pre-programmed in this

Please note that the fork should be already compressed slightly when sitting on the BEN

called negative spring travel ("SAG"). If the air pressure is too high, you sacrifice a lot of riding

the ground more quickly. Useful is a negative spring travel of about 15

case of the "SMOOTHER" fork means a compression of about 15 - 20mm.

the fork has a rubber ring on the left stanchion tube to facilitate the proper

Push the rubber ring all the way down and place the BEN-E-BIKE in the unloaded state vertically.

Now lift your child onto the saddle so that it does not touch the ground with the

BIKE with all its weight, thereby compressing the suspension fork.

If the air pressure in the fork is correct, it should be compressed by about 15 mm.

BIKE INSTRUCTION MANUAL

www.ben-e-bike.net
[email protected]

the stiffness of the fork can be adapted

left fork leg.

called "damper pump". If you

. Never use an ordinary tire pump or even a compressor

programmed in this case!

when sitting on the BEN-E-BIKE - this is the so-

a lot of riding comfort as the front

the ground more quickly. Useful is a negative spring travel of about 15 - 20%, which in the

proper adjustment of the air

BIKE in the unloaded state vertically.

the feet, but instead loads the

If the air pressure in the fork is correct, it should be compressed by about 15 mm.

Содержание TWENTYFOUR E-POWER PRO
































































Результаты поиска

Содержание TWENTYFOUR E-POWER PRO

Отзывы:

Бренды по названию

Популярные бренды

ben-e-bike TWENTYFOUR E-POWER PRO, Руководство пользователя

Результаты поиска

Содержание TWENTYFOUR E-POWER PRO

Отзывы:

Бренды по названию

Популярные бренды