16 BEN-
BEFORE EVERY RIDE
The BEN-E-BIKE is exposed to constant vibration during use. As a result, excessive wear can occur or it can
loosen screw joints.
•
If in doubt, ask your dealer to show you how to test the BEN
•
Check the BEN-E-BIKE before each ride according
•
Use the BEN-E-BIKE only if you do not notice any damage.
•
Only use the BEN-E-BIKE if there is no excessive wear and all screw
•
Thoroughly check the BEN-E-BIKE for damage and excessive wear before
chapter "Test Instructions").
•
Explain to your child that the BEN
TEST INSTRUCTIONS
Check before every ride:
•
that the quick release on the front wheel is closed and the front wheel
•
whether the tires are in good condition and sufficiently inflated. Let both wheels turn to check the
concentricity.
•
the condition of the frame and components.
•
look at all components and watch out for deformations, cracks and di
•
Grasp the handlebar, pedals and saddle one at a time and check that all components are
•
the function of the brakes by p
brake is applied. It should be impossible to pull the
that there is neither any brake fluid on the brake levers
•
the function of the lighting and bell
If the front quick release skewer is not properly
wheel may come off. There is then acute danger of an accident
The quick release skewer basically consists of the lever with eccentric for closing the quick release and the opposite
clamping nut, with which the preload is adjusted
-E-BIKE INSTRUCTION MANUAL
AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil
BIKE is exposed to constant vibration during use. As a result, excessive wear can occur or it can
If in doubt, ask your dealer to show you how to test the BEN-E-BIKE.
BIKE before each ride according to the test instructions.
BIKE only if you do not notice any damage.
BIKE if there is no excessive wear and all screw joints are fastened properly
BIKE for damage and excessive wear before your child uses the
Explain to your child that the BEN-E-BIKE should not be used if it is damaged.
that the quick release on the front wheel is closed and the front wheel is properly fixed
whether the tires are in good condition and sufficiently inflated. Let both wheels turn to check the
the condition of the frame and components.
ook at all components and watch out for deformations, cracks and discoloration.
Grasp the handlebar, pedals and saddle one at a time and check that all components are
he function of the brakes by pulling the brake levers and making sure that the wheel cannot be
be impossible to pull the brake levers completely to the handlebars.
brake fluid on the brake levers nor callipers.
and bell (if retrofitted).
ot properly tightened and thus the clamping force is too low, the front
wheel may come off. There is then acute danger of an accident!
consists of the lever with eccentric for closing the quick release and the opposite
clamping nut, with which the preload is adjusted.
BIKE INSTRUCTION MANUAL
www.ben-e-bike.net
[email protected]
BIKE is exposed to constant vibration during use. As a result, excessive wear can occur or it can
joints are fastened properly.
your child uses the bike (see
properly fixed.
whether the tires are in good condition and sufficiently inflated. Let both wheels turn to check the
scoloration.
Grasp the handlebar, pedals and saddle one at a time and check that all components are properly fixed.
s and making sure that the wheel cannot be spun if the
completely to the handlebars. Watch out
and thus the clamping force is too low, the front
consists of the lever with eccentric for closing the quick release and the opposite
